Singhla Scientific Industries

• Stable speed output even under unstable voltage conditions
• Low sample temperature rise
• High Capacity (R-8C BL / R-8M)
• High Speed (RM-12C BL / R-12M)
• Wide variety of rotors & reduction adaptors
• Brushless Induction motor with frequency drive
• Microprocessor controller with digital display
• Smooth & soft start
• Inverter fault detection with auto shutdown
• 7 segment LED display of speed Digital countdown timer & continuous run
• Dynamic brake for quick deceleration
• Last set parameters recall (Useful for repetitive analysis)
• Automatic door opening
• Stainless Steel centrifuge Chamber, easy to clean
• Safety lid interlock to prevent lid opening during centrifugation
• Imbalance detection & centrifugation stop with display of error
• Motor overload protection
• Gas hinge to prevent door falling
• Emergency lid lock release

• Feather touch setting keys
• Alphanumeric LCD display of speed & RCF
• Selection of 3 acceleration & deceleration profiles

• Compact Design
• ABS Plastic Mode Locker
• With Drower and Cupboard
• Mobile on Castors

Additional Information:

• Item Code: SSI-29

The new Buchi Rotavapor rotary evaporators are here! The rotary evaporators continues to build on the safety, ease of operation, and service that is expected from Buchi. The RII rotary evaporator performs important functions safely while also being affordable for the research and student laboratory. Key aspects of these rotary evaporators have been enhanced to provide the most ergonomic and functional designs. Buchi lab scale evaporators have a 2 year warranty, excluding consumable items such as wetted parts, glassware, items intended for consumption or replacement on a routine basis, or moving/rotating parts.

SSI-1 Rotary Evaporator Features: PTFE composite vacuum seal for long service life and effective sealingSpace-saving modular design lets you add integrated vacuum controllers and run preset time/pressure gradientsMotorized, quick-action jack raises and lowers glassware effortlesslyWide-range, PTFE-coated 4L heating bath, model B-491, with digital temperature display, uses oil or water, 20 to 180C (68 to 356F)Enhanced safety: insulated heating bath, plastic-coated glassware, and optional remote control and safety shieldProcess samples from 50 mL to 3 L SSI-2 Rotary Evaporator Features: Additional vapor temperature and rotation speed display!PTFE composite vacuum seal for long service life and effective sealingSpace-saving modular design lets you add integrated vacuum controllers and run preset time/pressure gradientsMotorized, quick-action servo-jack raises and lowers glassware effortlesslyWide-range, PTFE-coated 4L heating bath, model B-491, with digital temperature display, uses oil or water, 20 to 180C (68 to 356F)Enhanced safety: insulated heating bath, plastic-coated glassware, and optional remote control and safety shieldProcess samples from 50 mL to 3 L SSI-3 Rotary Evaporator Features: PTFE composite vacuum seal for long service life and effective sealingHeating bath ranges from 20 to 95C (69 to 203F)Manual quick-action jack raises and lowers glasswareAvailable with the three basic glass assemblies: diagonal, vertical, and cold-trap.

• Spreader (applicator) made of electroplated brass.
• Perspex base of 114x23 cm to support glass plates.
• Plate rack alluminium, anodised for ten 20x20cm or 20x10cm plates.
• Developing tank with lid.
• Spotting template made of perspex.
• TLC plates set of five 20x20cm. and two 20x5cm, or set of ten 20x10cm and two 20x5cm
  Glass sprayer with rubber bellow, cap. 100ml
• Micro-pipette9. Subscriber for marking lines made of stainless steel
• Instruction manual. 
• Same as above but the aluminium applicator Model No. SSI/48A

• Brass Applicator Spare Model No. SSI/49Aluminium Applicator Spare Model No. SSI/50Spotting template made of perspex. Model No. SSI/51Plate rack made of anodised aluminium to take ten plates. Model No. SSI/52
• Plate rack made of stainless steel to take plates of 20x20cm vertically for developing. Model No. SSI/53
• Glass plates all sides ground for T.L.C. Model No. SSI/54Size 20x20 cmSize 20x10 cmSize 20x5 cm
• Chromatography tank with cover for plates of different sizes Model No. SSI/55
• Size 20x5 cmSize 20x10 cmSize 20x20 cm

• Glass sprayer with rubber bellow. Model No. SSI/56
• Perspex base of 114x23 cm to support glass plates. Model No. SSI/57

• Dessicator cabinet: This is used for storing plates of TLC and for general laboratory work. Made of thick sheet, with stout glass door sealed with rubber gasket. A tray for silica gel dessicant and perforated shelf are provided. Model No. SSI/58
• Inner dimensions (height x width x depth) 30x50x35
• T.L.C Master Sheet for direct reading of Rfvalues. Evolved by Dr. S.K. Arora. Model No. SSI/59
• T.L.C plate storage cabinet made of wood with MICA on all sides. For transport and storage of coated plates, sealed against air humidity. Size 38x23x20 cm suitable for 24 plates of size 20x20 cm. Model No. SSI/60

Owing to a world class product range that aligns with application needs of multiple laboratories, today, we, Singhla Scientific Industries, have etched formidable business footmarks in our domain and secured goodwill and trust of clients spread across all category of laboratories like Pharmaceutical, R & D and quality control, Pathology, Microbiology and other laboratories in Medical College and Hospitals, Science teaching Under Graduates/P.G. Colleges, National Laboratories, Test houses and in industries like Pharmaceutical, Bulk Drugs, Tablet, Chemical, and Paint Industries.

Additional Information:

• Item Code: SSI-195

We are the prominent Fume Hood manufacturer. Our chemical fume hoods are fabricated out of thick wooden board these are designed so as to throw-out all toxic / harmful / vapors, thus protecting costly instruments and the person working in the lab. Outer is finished with sun mica and inner epoxy painted. Working tabletop is fitted with acid / alkali resistant tiles and a small washbasin with connections provide for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with florescent light and a gas cock for gas / air supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. 

• 150mm Heavy Duty Castors
• Removable Stretcher
• Epoxy Powder Coated
• Corrosion Resistant

Designed for low temperature incubation and routine determination of Bio-Chemical Oxygen Demand (B.O.D.). Double wall construction. Inner chamber made of richly anodized aluminium or highly polished stainless steel sheet with self supports for wide rangeofshelfspacing. Supplied with two/three removeable perforated shelves.

Exterior made out of thick mild steel sheet duly finished in white stoving enable paint or pastle mat finish colour combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature.

Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temp. insulation. The cabinet is mounted on castors.

Temperature is controlled by a sensitive thermostat from 5^oC to 50^oC + 1^oC. For lower temp. working a standard cooling unt with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temp. working.

The temp. can be regulated within the range by means of a high precision double action thermo regulator. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators, on off switch, L-shaped thermometer. Supplied with cord and plug etc. equipment is workable on 220 V AC 50 Hz single phase.

Inner chamber sizes in mms. Capacity in cft.:

• 610x455x410 (24"x18"x16") 4.00
• 825x500x415 (33"x20"x16.6") 6.1
• 865x565x565 (34.6"x22.6"x22.6") 10.0
• 900x650x575 (36"x26"x23") 12.0

Optional:

• Timer 0-24 hours day night cycle.

• Co2/air mixer nozzle is provided.
• Internal illumination with 3 fluorescent tubes.
• Digital temp. Indicator- Cum –Controller.

• vi) Automatic Voltage Stabilizer 3-5 KVA recommended must

• Construction: Constructed in double wall-PUF Insulated. Interior : Stainless Steel 22 G Exterior : G CRCA MS Sheet 1.2 mm Full front opening door. Doubled walled typed with transparent full view Tufund glass door. Door : fitted on the chamber by heavy-duty hinges. Locking arrangement. Gaskets on the door. Fitted with Castor lockable wheels for ease of mobility
• Digital Temp. Controller: Microprocessor Based Digital Temperature Controller cum Indicator used for controlling 4 °± 1 °C, accuracy : 0.1°C, Fan Fitted in the Inner side for proper air circulation in chamber
• Air circulation: Having provision for Air Circulation through internal fan facility. 
• Inspection Lamp: One low watt bulb for internal inspection automatically / manual operated,
• Inspection Lamp: One low watt bulb for internal inspection automatically / manual operated
• Trays / Shelves: No of Trays 3 in S.S. for proper Storage of blood bags. It is fitted on Imported Telescopic Channels.
• Safety: Electronic safety device. Inbuilt Voltage Stabilizer. Audiovisual alarming case of power failure, opening the Door, & in case of high & Low internal temperature of BBR. Low & High Voltage protector.
• Weekly Circular Chart Recorder: For Continuous Temp. Recording Weekly Temperature Circular Chart Recorder (Range -10°C to + 10°C), Accuracy: 0.2°C, for Temp. Display visually & for continuous temperature monitoring 2. Servo Voltage Stabilizer

Deep Freezer/Low Temperature Cabinet Horizontal/Vertical -80 Degrees C:

• Deep-Freezer / Ultra Deep Freezer Cabinets are in conformity with all requirements of industry for economic way to create Temperature below freezing point to suit various standards application in the field of, science & research for storage & testing in biology, anatomy, chemistry & in many other fields, for industry & science.

Features:

• With safety switch to stop shaking when opening door.
• Built-in circulating fan for temperature stability.
• Adjustable speed range.
• Rubber non-slip mat to prevent slipping.

Humidity and temperature control Cabinet are well designed for conducting different laboratory and research experiments for different quality control tests to be carried out on different materials e.g. cement, motors, various electrical fittings, electronic circuits and components, cloth and paper etc. under controlled temp. and humidity conditions.

Construction:

• It is of robust construction. The outer body is made of M.S. Sheet duly pre treated & finished with epoxy powder paint for lasting finish. Caster wheels provided for easy mobility. The intermediate wall is of G.I. Sheet. Inner chamber is made of Stainless Steel/Aluminium Anodized. Tray are also supplied to make the shelves inside the chamber. Inner chamber facilitates self placement at desired height. The chamber is insulated by filling glass wool in the space of between outer body and chamber to prevent temperature loss. Door is also insulated.
• Forced air circulation in the chamber by a blower ensures uniform temperature and humidity inside the chamber. Finned type heater duly insulated from body are provided in the moving air path. Humidity is achieved by generating of steam by immersion type water heater in water reservoir & its subsequent condensation in the circulating air.

Temperature and Humidity Control:

• Dry temperature is controlled by reliable imported thermostat from ambient to 55°C ± 0.5°C. Humidity is also controlled by imported thermostat which controls wet temperature for controlling humidity and switches off immersion heaters to stop generating steam. Arrangement exist only for increasing humidity & not for decreasing the humidity.

• 455 × 710 × 455 mm
• 605 × 605 × 605 mm
• 605 × 910 × 605 mm

Shaking Tray Size :

• 275x275x150mm :12ltrs.
• 405x300x150mm : 18ltrs.

Optional:

• Digital temp. Indicator.
• Shaking tray for 25ml, 50ml, 100ml, 250ml, 500 ml & 25mm dia. test tubes or conical asks.

Class II Biological Safety Cabinet are fabricated out of thick board duly sun mica clad. Interior surfaces are epoxy painted for its longer life. The worktable is made of heavy gauge S.S. sheet and is fitted with U.V Germicidal Light, static pressure Manometer, Exhaust System (suitable for 6 feet duct) and Virus Burn Out Unit. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre filter and HEPA Filter. Air is drawn through pre filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency retaining all air- borne particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced. Motor of 1/ 4 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. The height of the working table provides a comfortable "Sit Down" working position for the operator.