Singhla Scientific Industries

Tissue Embedding & Cooling System features ease of operation, spacious work surface and large container capacity. It has five independent microprocessor controlled heating zones, paraffin dispenser, cooling plate, foot switch and heated holder and work platform. The unit incorporates paraffin plate can be used separately or combined depending on user requirement. Each heating and cooling function is controlled by accurate digital thermostats heating up to +70 Deg C, cooling down to -20 Deg C with removable stainless steel basin to facilitate cleaning operations.

Features and Construction:

• Inner tank (Single piece) made of black anodized aluminum.
• Housing made of powder coated aluminum.
• Front panel consist of temperature regulator knob, mains switch and pilot lamp.
• Inside black and outer surface finished in powder paint, with wide enough rim for drying the wet slides.
• Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & inner tank.
• Heating elements are positioned in the floor and side walls & a natural mixing of the medium arises, providing better temperature distribution in the bath.
• Temperature is controlled by imported capillary type thermostat, from ambient to 70oC with an accuracy of +2oC.
• The low 110mm depth of the bath allows comfortable and safe working.
• Supplied with Dust Guard Lid made of black anodized aluminum.

Application:

• "SSI” Double walled Tissue floatation water bath is used for precise control of different samples at constant temperature most ideal for Histological, chemical, clinical and bacteriological laboratories used to stretch and dry cut tissues.
• It is ideal for tissue culture, enzyme reactions fermentation tissue section processing etc. for preparing distortion less and wrinkle free tissue specimens. 
• Its exact temperature regulation ensures evenly stretched cuttings that are clearly visible in the anodized bath.
• The cuttings are carefully dried on the warmed rim of the bath. Offers highest level of performance, flexibility and control for most demanding applications.

Microtome At A Glance:

• LCD Display with Feather touch keypad
• Cutting / Trimming Mode
• Fast Forward/ Backward Function
• Increase/Decrease Section Thickness
• Retraction can also be adjusted
• Section Counter/Section Thickness Display
• Motorized Feed Drive
• Finger Protection Guard

 

Specification:

• Section Thickness Setting : 0.5-100μm
• Setting Values : From 0.5μm-5μm in0.5μm increments, From 5μm - 20μm in 1μm increments, From 20μm - 60μm in 5μm increments, From 60μm - 100μm in 10μm increments
• Trimming Thickness Setting : 1μm - 600μm
• Specimen Retraction Range : 5 - 100μm in 5μm increments
• Minimum Setting Value : 0.5μm